DSO138 Enclosure (Case) Multicolor Label Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of DSO138 Enclosure by Peťas that adds colored labels and a light guide.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
An improvement of the original model by Peťas. Did one because I urgently needed some more or less rigid enclosure for my DSO138 and had very little colored plastic for the labels.
Also added a light guide for the trigger LED.
Printing and Assembly
Printed using Prusament White and Orange PETG using Generic PETG profile and scaling up the model to 100.5%. PLA can probably be printed without upscaling.
The light guide done using recycled bottle PET, since I had no other translucent plastic on hand. After printing the light guide glued to the back of the front panel using cyanoacrylate glue.
To put everything together four M3x10mm flathead screws were used.