Parametric 3-4-5 tape measure holder for deck layout right angles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes capturing right angles easy when you don't have a helper. Screw the holder down and clip the end of the tape in.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
When laying out a deck, i used the 3-4-5 method to capture right angles. I didn't have a helper, so i used this to hold one end of the tape by screwing it to the house rim joist. I had to scale it up to 6-8-10 and 9-12-15 to ensure accuracy over a longer distance.
This was designed for harbor freight tape measures, but i attached a parametric source file so you can adapt it to your tape measure. It works better when the tape measure clips in snugly.
Designed for a #9 generic screw, but a drywall or deck screw should work in a pinch. (Screw hole params are also parametric).