Petcock Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this for my boat, but it may be useful for any motor with a petcock drain. My boat antifreeze drain is…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this for my boat, but it may be useful for any motor with a petcock drain. My boat antifreeze drain is obstructed by some cables, which doesn't allow use or a normal funnel to collect the drained antifreeze. The rectangular portion of the funnel slides over the petcock wingnut. The lower cylinder is 1/2" OD to accept a hose which can then go to a collection bottle. I made this out of polyurethan so it would be flexible enough to install of the petcock wingnut.
How I Designed This
I created a hollow box, then created a hollow cylinder and placed them about 30mm apart. Then I used the Create-Loft function in Autodesk Fusion to join the two shapes.
Category: Tools