Axisflying Manta5 FDM parts (original)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Axisflying Manta5 and Manta6 original FDM parts, .STL and .STEP files.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Axisflying Manta5 and Manta6 FDM parts, .STL and .STEP files.
Axisflying seems to have quietly updated some details of the Manta5 frame, but the photos and FDM part files on the official website haven’t been refreshed—at least not for now. Based on the older part files and the actual parts I received with my own Manta5 frame, I made this modified version to fit the frame I purchased.
All parts are available in both .STL and .STEP formats. I’ve renamed them in English (since the originals used Simplified Chinese, which sometimes caused encoding issues). For parts that Axisflying only released as .STL, I recreated them through reverse engineering based on the original design.
I printed these parts on a Prusa MK4, fine-tuning small dimensional inaccuracies. The material I used was Esun TPU95A, and the results turned out great. Later, I also printed them with a Prusa Core One, which produced equally good—or even slightly better—results. If you run into printing issues, you can check the original part orientations from Axisflying or make adjustments using the .STEP files.
I’m not very fluent in English, so the naming in both the introduction and the .STEP files might have some imperfections. If you have any suggestions for improvement, I’d really appreciate your feedback.
--------------------------------------------------------------------------------------------------------------------------------
The upper part is in English and the lower part is in Chinese. The content is the same.
上為英文 下為中文 內容相同。
--------------------------------------------------------------------------------------------------------------------------------
Axisflying Manta5、Manta6 的FDM零件，.STL 與 .STEP 檔案。
Axisflying 似乎悄悄的修改了 Manta5 frame 的一些細節，在官網中的照片和FDM零件檔案卻沒有換新，至少現在沒有，我基於舊版零件檔案與我購買時實際得到的零件修改出了這個版本以用於我自己購買的 Manta5 frame 。
所有零件皆有.STL 與 .STEP 檔案，以英文重新命名了這些零件（為避免亂碼問題，原廠使用的是簡體中文），對於原廠只提供 .STL 檔案的零件則基於 Axisflying 的原始設計進行逆向工程。
我使用 Prusa MK4 來製作這些零件與調整一些細節的誤差，材料使用的是 Esun TPU95A，結果非常好，後續也使用 Prusa Core One 製作並得到幾乎一樣甚至更好的結果，如果在列印上遇到問題可以參考原廠零件的列印方向以及從 .STEP 檔案進行修改。
抱歉，我英文不是很好，在介紹與 .STEP 檔案中對零件的命名可能存在一些問題，如果在這部分有建議還請告訴我，感謝。