Topeak TetraRack - Rear Basket Connection Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Topeak TetraRack R2 Rear Bike RackThe mounting holes are designed according to this rear basket from…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Topeak TetraRack R2 Rear Bike Rack
The mounting holes are designed according to this rear basket from Amazon: https://www.amazon.com.tr/dp/B0BTPH3FS8
I added two types of front lockers: one is attached to the rack, and the other is attached to the basket using M3–M4 bolts. I preferred the C-shaped front locker design.
I printed the rail vertically for smoot side surface, so I added two side supports and one inner support to provide extra bending strength. All supports were printed horizontally.
The side supports must be printed in two pieces, and one of them should be mirrored along its length.
Finally, I assembled the parts using super glue.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun Super Racer
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.3
Infill:
50+









Category: Gadgets