MF Nano for Sovol Zero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified MF Nano filter for stock Sovol Zero chamber heater mounting
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 463
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Disclaimer: The Nevermore Micro V4 is a superior choice, it moves significantly more air than the MF Nano using the same fan, and its form factor fits the rear enclosure wall perfectly. I recommend building it instead.
This is a remix of the MF Nano Filter, modified to fit the Sovol Zero, and made compatible with 4x3 magnets instead of 4x6. It needs an additional MOSFET board for controlling the 5015 fan or I suppose you could find an 5015 PWM controlled fan and plug it into K_FAN_3 on the motherboard. Use at your own risk. I take no responsibility for any damages caused by this. Mounting points have been adjusted for an installation in existing holes (the ones intended for a chamber heater). Print with at least ASA/ABS.
BOM (not including the original MF Nano parts):
8x 4x3 magnets
2x M3x16 screws
2 more M3x5x4 heatserts
Please post your makes! :)