Prusa CORE One Nozzle Wiper

🇩🇪 Deutsch

Ich habe zwei kleine Anpassungen vorgenommen:

Die Höhe leicht geändert, um das Abheben der Druckplatte zu erleichtern.

Das Loch für das Heat-Insert oben geschlossen, da es meiner Meinung nach so schöner aussieht.

Ansonsten ist das Modell identisch zum Original und kann weiterhin mit den gleichen Teilen verwendet werden.
Als Schraube wird eine M3 × 8 mm verwendet.

🇬🇧 English

I made two small modifications:

Slightly adjusted the height to make it easier to remove the build plate.

Closed the hole for the heat insert on top, since I personally find it looks cleaner this way.

Otherwise, the model is identical to the original and can be used with the same parts.
A M3 × 8 mm screw is used.

Druckeinstellungen / Print Settings

Material: PETG recommended (PLA or ASA also possible)

Layer height: 0.2 mm

Infill: 20 – 30 %

Supports: yes

Orientation: as provided in the STL

G-Code Hinweis / G-Code Note

⚠ WARNING: USE AT OWN RISK!
The following G-code works for me, but carefully check if the coordinates work on your printer too, before this slams your printhead into something.

Add the following code before or after this line in your start G-code:

G29 P9 X208 Y-2.5 W32 H4 

Then add this section:

; Nozzle Wiper ; 

G0 X210  Y-14 Z1.5 F3000;
G0 X168 Y-17 Z0.5 F3000;
G0 X168 Y-14 Z0.5 F3000;
G0 X210  Y-17 Z0.5 F3000;
G0 X168 Y-14 Z0.5 F3000;
G0 X168 Y-17 Z0.5 F3000;
G0 X210  Y-14 Z0.5 F3000;
G0 X210  Y-14 Z0.5 F3000;
G0 X168 Y-17 Z0.5 F3000;
G0 X168 Y-14 Z0.5 F3000;
G0 X210  Y-18 Z0.5 F3000;
G0 X168 Y-17 Z0.5 F3000;
G0 X168 Y-17 Z0.5 F3000;
G0 X210  Y-14 Z1.5 F3000;