Parametric MOLLE cylinder pouch with elastic cord retention
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric MOLLE cylinder (for smoke grenade, flashlight, bottle, etc.) pouch with elastic cord retention
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a two piece, parametric MOLLE cylinder (smoke grenade, flashlight, bottle, etc.) pouch with elastic cord retention. While the exported models here fit Polish ED-60 and GD-10 smoke grenades, and a Olight Baton 3 flashlight, you should be able to parametrize it to hold anything round.
Bill of materials
- 3 x M3 nut
- 3 x countersunk M3x10 bolt, optionally longer if you change backplate/pouch thickness
- Elasticord of desired diameter, pictured is 6 mm (just fine for a grenade, definite overkill for a flashlight)
Printing and assembly instructions
The fits here are optimized for 0.25 mm layer height. Increase wall count accordingly to carried load.
Weave elastic cord through the holes as desired, tie on the back.
Insert nuts into the backplate. Mount it on your MOLLE receiver, then bolt the pouch to it.
Source code
Source code for the holder itself and the MOLLE backplate is available on my GitHub. The variables are documented, but if you have any questions, please don't hesitate to reach out.