1 / 1
IP 2368 case, USB-C 100W 4 cells charger / powerbank electronics — zdjęcie 1

IP 2368 case, USB-C 100W 4 cells charger / powerbank electronics

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The case to encapsulate a IP2368 PCB

Ocena
0 / 5
Polubienia
2
Pobrania
36
Wydruki
0
Wyświetlenia
261
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I used M2 threaded inserts for the mounting of the pcb and M3 inserts for mounting of the case. Alternatively you can punch the 4 holes open und screw through the case (e.g. to screw it onto wood).

I used PETG and it worked fine. PLA might melt, because the pcb can get quite hot while in use.

Tagi