Micro/Mini Contour Guage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a countour guage small enough for what I needed. So I whipped this up real quick!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
150mm long - 130mm of adjusting contour sliders
This model is not perfect but it suits my needs for what it is.. ( still learning fusion and the need for tolerances lol)
It's a bit flimsy, but still gets the job done.
When I printed my retainers, I moved the flat face down about 1mm to remove the ridges before printing. Post a make if you include them and succesfully print the ridges!
There are about 90 contour sliders, make sure you get your machine tuned for them before printing a lot of them!!!!
Hardware includes: 4- M-3 x 12 +nuts
1- M-4 x 25 + nut. ( to lock the contour in place. )