1 / 1
Freon stand for proper filling of AC units — zdjęcie 1

Freon stand for proper filling of AC units

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stabilize Freon canisters on a kitchen scale for accurate charge weight

Ocena
5 / 5
Polubienia
6
Pobrania
61
Wydruki
1
Wyświetlenia
175
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Made to support Freon canisters while charging AC units. 

When charging AC after replacing components, it is important to vacuum out the system and then charge based on weight using a manifold gage set. This stand allows the small freon canister to be supported on a simple kitchen scale, upside down while monitoring weight of refrigerant dispensed. 

IMPORTANT NOTE: I have recently learned that it can actually damage the compressor to fill the system with the can inverted. Inverted filling it only recommended for industrial large canisters filling from the high side, not DIY cans filling from the low side.

Tagi