1 / 2
Stanley Metal Jeweler's Screwdrivers Tray — zdjęcie 1
1 / 2

Stanley Metal Jeweler's Screwdrivers Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stanley Metal Jeweler's Screwdrivers Tray

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

It has been many years since I had a tray that wasn't broken for these stanley jeweler's screwdrivers.  Time to remedy that! Unfortunately I seem to have lost one… either that or 7… I think I had two sets at one point…

Print in your choice of materials or colors. 

Two models to choose from - ‘Case Bottom’ is a close match to the original bottom case I had (but it was in multiple pieces) and without the hinges (which had long disintegrated). This model feels a little flimsy when printed in ABS, so I made the walls a little thicker (1/16" vs 1mm) and made the outer walls a higher to other things can sit level on it. This ‘improved’ model is the ‘Case Bottom - Thicker’ model.