parametric lock collet for telescopic rod v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lock collet for a telescopic rod (e.g. fixing rod for a bike maintenance stand, pinch rods for woodworking), redesigned.
- Ocena
- 3 / 5
- Polubienia
- 30
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 561
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU Lesser General Public License
This is a collet to lock a telescopic rod made of two tubes (e.g. aluminium or PVC) of such diameters that one fits snugly in the other.
This is a redesign of my other model, easier to print, easier to customize in the code, easier to fit the tubes, easier to fix if damaged, and cheap to reconfigure when your needs (i.e. used tube diameters) change.
If you're using the attached models, you're expected to put your own holes through the compression crown and reduction sleeve (e.g. add negative volume in Prusa Slicer). The OpenSCAD code can, of course, generate them ready with holes.
Some uses of a telescopic rod in a workshop:
- fixing rod for a bike maintenance stand, to keep the handlebar and front wheel from moving during work
- pinch rods for woodworking, to check squareness of a box or drawer glue-up (diagonals are the same length) or to measure inner dimensions of places awkward to reach with a tape measure