Cupholder / Caddy for Beechcraft Bonanza
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cupholder, cellphone holder, and pen holder for your Beech Bonanza.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 1488
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 6/12/2022 - Updated model to fit larger bottles and to provide more spacing for the mic clip.
A new version (3) is available. In addition, I uploaded the caddy and the hook as separate files if you'd rather not use modifiers in your slicer. You'll need to position the hook so it intersections the edge of the bottle holder in your slicer when you print.
After extended use, I recommend printing in PETG or stronger material that will be less susceptible to deformation from cockpit heat.
---
I find the cupholders under the throttle quadrant useless. I saw ajden designed a great caddy (https://www.thingiverse.com/thing:4617768), but my Bonanza has a different mic clip on the armrest. So, inspired by ajden's Bonanza Caddy on Thingiverse, I made a modified version to fit the other type of microphone holder clip on the armrest.
This caddy has space for a water bottle, two pens/pencils, and a cell phone (fits iPhone 12/13 Pro or smaller with an Apple case, but not Max). It works with the armrest in the up or down positions.
I printed PLA 0.20 layer height with 3 perimeters and 20% infill. For the hook, I used a modifier to print 100% infill. Supports are needed on the for the clip only.