XLR Cable Label Rings - quick marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Numbered snap-on rings for labeling XLR and audio cables – clean and fast organization.
- Ocena
- 4,5 / 5
- Polubienia
- 181
- Pobrania
- 932
- Wydruki
- 4
- Wyświetlenia
- 3433
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple but extremely practical rings for quick labeling of XLR or other audio cables.
No more guessing which cable belongs to which channel – just snap the numbered ring on and you’re done.
Designed for ≈ 5 mm cable diameter (typical microphone, signal, or DMX cables).
EDIT: Added a full set model (0–9) with a break-away grid for better printing stability. The grid connects all rings together, making batch printing more reliable and preventing first-layer detachment. Numbers 1 and 2 were adjusted for better bottom-layer printing, and 9 now uses a different font that prints more reliably.
It can be easily snapped off after printing.
⚙ Printing parameters:
Material: PLA or PETG
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 100 %
Supports: None