Shower Toothbrush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do not waste time under a shower!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Was a bit surprised there was no shower holder for toothbrush. I know people who use time in shower to brush their teeth. So why not hold a brush right on the shower bar?
The aim was to create very lightweight holder for relatively short printing time. Designed for Grohe 25 mm (diameter) shower bar, but feel free to remix it to your dimensions.
To assemble:
- Print two HOLDER.stl, one TOP_PART.stl, one BOTTOM_PART.stl, and one VERTICAL_BAR.stl.
- Top and bottom parts fits easily in holders.
- Put vertical bar in appropriate holes in both top and bottom parts.
Holds two brushes and one toothpaste, or razor. You can either remake vertical bar longer or shorter, or change the distance between top and bottom parts moving them along a given bar.
Printer settings:
Printed with white Amazon Basics PETG, 0.2 mm layer, 20% triangular infill. I used two layers for walls, top and bottom, but I would try with three next time.
P. S. My first design on PrusaPrinters! This model created from scratch in Fusion 360.