Bin filler and dispenser for smaller parts, especially for WAGO clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
8,74 € – 10,68 € netto (bez VAT)
Dla pliku: Bin_filler_and_dispenser_all_parts_0.4n_0.2mm_PETG_COREONE_6h51m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 9,71 € netto (środek widełek).
- Masa podana przez autora
- 194 g
- Czas druku podany przez autora
- 6,85 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Bin filler modules for every popular kind of bins. For Honeycomb storage wall.
- Ocena
- 0 / 5
- Polubienia
- 128
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 2949
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bin filler and part dispenser for Honeycomb storage system
Functionality
With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back to starting position.
It is functional for every popular kind of bin. E.g. FESTOOL with Systainer³, Allit, and of course Gridfinity
If you only want a few parts you can just press the button above and fill the parts into your hand.
Required hardware
This model requires one spring per module and a 2mm thick acrylic panel.
Spring size: 9x35mm
Panel size: 55x78mm
I am planning to replace both in a future update with printable parts.
Printing and settings
Try to use the .3mf file for orientation.

I changed the settings like above. it is important to activate organic supports. 5% infill is enough. You can see the modified supports in the .3mf file.
Slider and main body will be printed into each other. You do not have to change anything. Just enable supports and remove them when finished.
I used PETG but other materials should also work fine👌👍.
Make sure: The press label is not included. You are welcome to add custome text or logos if you want to. Like this you can put the logos of the companies of the parts like the wago logo you can find here: https://de.wikipedia.org/wiki/Datei:Logo_WAGO_2020.svg Make sure not to use such logos commercially and check the copyrights of the companies.
Here is the instruction to put text on objects: https://help.prusa3d.com/de/article/text-tool_399460
The full print will take around 7 hours and about 200g of material.