Parametric SKADIS Command Strip Mountable Boards (121 premade variations)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric SKADIS boards, wall-mountable using Command strips, and with 121 different premade variations.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a design for a parametric SKADIS-style board, designed to be attached to a wall using Command strips.
The design is fully parametric (made in FreeCAD 1.0.2), and can be customised in FreeCAD using the spreadsheet.
Premade Sizes
The pre-made sizes are available in 3mf and STEP file formats.
There are 11 different widths and 11 different heights, for a total of 121 different combinations:
- Widths between 120 and 300mm in 20mm increments
- Heights between 120 and 300mm in 20mm increments
All file names are in width x height format (e.g. a 200x300 would be a 200mm wide by 300mm high board).
Python Script
I have included the Python script I used to automatically generate all the combinations. This is run using freecadcmd.
Other models shown
The MagSafe holder is by Chongfun and the watch holder is by clemon8.