Parkside Trays Modular Mount Screw-mounted/Skadis T-Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introducing a set of modular holders for Parkside trays, fully compatible with the Skadis T-Nut system or screw-mounted.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 845
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introducing a set of modular holders for Parkside trays, fully compatible with the Skadis T-Nut system or screw-mounted.
You can finally mount your trays on the Skadis Pegboard using T-Nuts or simply screw them to the wall with screws.
Key Points
1. You can choose between two options: the simplest mount that you can easily install, or mounts that you can combine yourself.
2. There are different size options to choose from depending on the size of the tray (x1 x2 x3 x4).
3. I recommend using PETG instead of PLA because of the general better mechanical properties in this case.
4. For versions with screws, the screw hole diameter is 5 mm and the head diameter is 8 mm.
5. For the Skadis T-Nut version, you will need M2.5 or M2 bolts (preferably with a countersunk/cone head) with a length of 16mm (you can also use bolts with a max. lenght of 24mm).
6. For more information about Skadis T-Nut, visit the Skadis T-Nut model - designed by 6d6178.
Print instructions
1. You can print with PETG, PLA, or any other filaments, but PETG is the most optimal.
2. The layer height I tested is 0.2 mm.
3. You can choose the wall loops or infill pattern and its % yourself. My settings are: 3 wall loops, gyroid 15%.
4. I made the .3mf files available, ready for printing on the Bambu Lab A1 printer.
5. !!! Use Arachne Wall Generator !!!
6. !!! If you are printing on a Prusa mini, Bambu Lab A1 mini, or other printer with a small build volume, please read the section for small printers !!!
For smaller printers (Prusa mini, Bambu Lab A1 mini, etc.)
1. This section refers only to x3 and x4 mounts. You can print x1 and x2 mounts as usual.
2. I have split the x3 and x4 versions into two parts.
3. !!! Before printing the mounts, I recommend printing the tolerance test included in the files (below the folder FOR SMALLER PRINTERS). The test consists of printing three small joints (loose, tight, super tight). After printing, choose the best option for you !!!
4. For most printers with well-calibrated filament, the best option will be to print the tight version.
5. The simple x4 version and all x3 and x4 modular versions are prepared in 2 parts. The simple x3 version can be printed according to the diagonal of the printer bed (the .stl file is rotated by default below the folders FOR SMALLER PRINTERS).
6. You don't need to glue anything, just print the version that works best for you. After attachment, everything will be stable.
