RPi Filament Sensor Mount for the da Vinci Jr
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On my davinci jr, I replaced the Bowden feeder and mounted it outside the unit. There is a filament sensor that is in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
On my davinci jr, I replaced the Bowden feeder and mounted it outside the unit. There is a filament sensor that is in the stock feeder that I wanted to keep. I also wanted my Raspberry Pi to be mounted inside the unit so I created this bracket.
There are two versions of this. First is a solid bracket, and the other is honeycomb.
This is designed in openSCAD.
Thanks to EvanCarlsen for the honeycomb generator code in https://www.thingiverse.com/thing:1652822 that I used and
to mattjoyce for his parametric 90 degree code in https://www.thingiverse.com/thing:2366480 that I used.
Print Settings
Printer:
da Vinci jr 1.0 from xyzprinting
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
50%
Notes:
On the xyzware, I used Excellent Quality, 50% infill and 0.2 layer height
Category: 3D Printers