XL Cable Clip Click Remix Update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An improvement which better aligns the electrical cable, PTFE Tube, and flexible plate on the Nextruder.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 255
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
After remixing the original cable clip to being 28mm (from the original on 22.5mm) on center between the electrical cable and the PTFE tube I still didn't like the how the flexible plate (plastic strap which supports the electrical cable and PTFE tube as it festoons from the Nextruder tool mount) still caused a misalignment from vertical.
This update puts the electrical cable and PTFE tube in the proper relationship (straight-up) along with the flexible plate. As you can see from the photos now all three parts are in alignment and everything stays vertical out of the Nextruder.
You will need to print one cable clip for each Nextruder on your XL and the new clip will replace the current clip closest to the Nextruder.
I printed this out of Prusament PETG at 100% infill. I printed one at 15% infill (by mistake) and felt it wasn't rigid enough to maintain the alignment of all three components.
I hope you find this remix update to be a useful addition to your XL.