Continental 100 Typewriter Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for the Continental 100 Typewriter. 2 versions
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Feet for the Continental 100 typewriter. Two versions as the front and back are slightly different, at least on mine they were. Check if the pegs in the case that the feet snap onto are different diameters, and if they aren't then you will need to print both options to see which one fits yours. Height is the exact same, only the center bit is changed.
Material/Filament:
- Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be soft enough. If you use too high of a hardness the surface that touches the desk will not be pliable enough and will skate around a lot easier. I did a test print with 90A and it wasn't ideal, but maybe if you do low enough infill it can be pliable enough but 100% infill on 75A is a great sweet spot that.
Feel free to print for sale, but I ask that you make pricing reasonable as that is why I went through the effort to model these.