Hermes 3000 1st Gen & 2nd Gen Typewriter Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for the 1st gen, curvy and 2nd gen, boxy Hermes 3000 typewriters. 2 versions.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Feet for the Hermes 3000 1st gen curvy, and 2nd gen boxy typewriters. Both versions are down below.
Material/Filament:
- Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be soft enough. If you use too high of a hardness the surface that touches the desk will not be pliable enough and will skate around a lot easier. I did a test print with 90A and it wasn't ideal, but maybe if you do low enough infill it can be pliable enough but 100% infill on 75A is a great sweet spot that.
Feel free to print for sale, but I ask that you make pricing reasonable as that is why I went through the effort to model these.
