1 / 7
Pokéball Flexible Coasters – Gotta Print ’Em All! -No MMU — zdjęcie 1
1 / 7

Pokéball Flexible Coasters – Gotta Print ’Em All! -No MMU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fun Pokéball-inspired coasters with a flexible design. Add a touch of nostalgia to your coffee table.

Ocena
4,667 / 5
Polubienia
415
Pobrania
738
Wydruki
1
Wyświetlenia
4479
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

Description

Show off your Pokémon fandom with these Pokéball-inspired coasters! 

Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee table. No MMU required!

MMU version and Coaster Holder coming soon!

Features

  • Approximately ~100 mm (4") diameter.
  • Prints flat with standard PLA/PETG.
  • No MMU required.
  • Honeycomb pattern for a flexible, fabric-like texture.
  • Great for decorative or light-duty coaster use.
  • Clean, layered Pokéball design.

Recommended Settings

  • Material: PLA
  • Layer height: 0.2 mm
  • Infill: 15%
  • No supports required
  • Tester file available, if needed.

Printable Instructions

You'll need to apply your color changes when slicing the files. For all the files using a layer height of 0.2mm, the color changes are at Layers:     7.80     8.20     8.60 

Colour Orders (Also in model file notes)

  • Pokeball: Red, White, Black
  • Great Ball: Blue, White, Black, Red
  • Ultra Ball: Black, White, Black, Yellow (2 different blacks or dark grey)
  • Master Ball: Purple, White, Black, Pink
  • Premier Ball (without Border): White, Red
  • Premier Ball (with Border): White, Red, Black

Avoid using translucent filament… especially when you transition between black and a different color ._.

Design your own pattern!

 Blank Step file is available!

Design Notes: 

  • I would limit to 4 colors if you are not using an AMS
  • Allow for 2 layers per color (i.e for 0.2mm Quality, Each layer should be at least at least 0.4mm in height)
  • Try to spread out the layers heights as much as possible, don't have all the colors on side

Tagi