X1C / P1S Side Spool Holder w. removable rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side spool holder for bambu lab P1S printer.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Standard Digital File License
Another right side spool holder for Bambu X1C or P1S, fit for my daily use case.
The spool holder shaft is removable, so that you can minimize the printer space and for now uses the orgingal metal spool holder, that came with the printer. The clearence to the rear belts should be enough for all covers here. Another right side spool holder for Bambu X1C or P1S, fit for my daily use case. The spool holder shaft is removable, so that you can minimize the printer space and for now uses the orgingal metal spool holder, that came with the printer. The clearence to the rear belts should be enough for all covers here.
Planned with a simpliefied material usage for faster and easier printing. I used the 0.2mm strenght profile with 25% cubic infill and 6 walls. Only the small screw countersinks and the connecter use small tree supports. They can be just pushed out with the allen key screwdriver after printing.
It needs three M3x12mm screws, either the ones from Bambu or similar ones.
Additional a PC4-M10 Pneumatic Fitting can be used as an additional reinforcement hold of the PTFE tubing, but I added a small 4mm-diameter hole, so that only the tube works as well. There is no thread for the fitting, as I prefered to be able to pull the tubing faster.