Lightweight Storage Container – 81 Sizes (32–160 mm)

Explore a new VaseMode technique with dual-wall construction for greatly improved strength and rigidity compared to standard single-wall prints.

The two walls are stitched together by a fine textured seam, which makes the dual-wall concept possible.
That “stitch” is the key part of this design – it locks the walls together layer by layer, creating a clean look and a stronger shell without losing the continuous single-line flow of VaseMode.

Includes 81 size variations, with diameters and heights from 32 mm to 160 mm, in 16 mm increments.

Typical weights (with lid):

32×32 mm: 6.5 g          64×64 mm: 25 g          128×128 mm: 97 g          160×160 mm: 150 g

Printing instructions (all required):

Mode: Spiral Vase

Layer height: 0.2mm

Bottom layers: 5

Slice gap closing radius: 0

 Outer wall: 0.50mm (try 0.51–0.52mm if the walls aren't fusing perfectly)

💡How the 1mm Dual-Wall works: The model's walls are exactly 1mm thick, meaning two continuous vase-mode passes at 0.50mm width will fuse perfectly (0.50mm x 2). If your specific filament doesn't merge well, slightly increase the width (0.51–0.52mm) for a tighter bond, but don't go too high to avoid surface bumps.