RV Camper Drawer Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RV Camper Drawer Latch the same dimensions as original parts
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 972
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
I purchased a 2005 motor home and have been slowly fixing some of it's many problems. One was several drawer latches were broken and the latches I could get were not the same size and would require new holes. Since I did not want extra holes I made 3D models that were the same size as my originals. On one model I added a screw hole to the center for extra strength when opening the drawer. I have not used the extra hole version as the original design has so far worked quite well. I designed this using DesignSpark and have included the rsdoc so it can be modified and adjusted if needed.
I used PLA
100% infill