MK3 Supra mount for EMU Black ECU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed an easy mount for the EMU black in a MK3 surpa
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I printed it in PETG. If you use ABS or ASA, be sure to scale it up as needed. It should hold the ECU on its own, but slide in and out without excessive effort.
There is a zip tie hole in the back, should you want to add that bit of security to it
The hole in the middle is for a self-tapping screw. You can do like I did and add that for an extra piece of mind, but you will see that it stays pretty well on its own
Prints with no supports on my printer in about 3 hours
Note: To put the black connector on or off, you need to slide the ECU out of the mount. This is very easy to do. I did it dozens of times while wiring it all up.