Wall mount bracket for Speedport SMART 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for a Telekom Speedport Smart 4 router
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Smart 4 router cannot be mounted directly on a wall like its predecessors. Presumably, this affects the antennas.
This wall mount could safe this problem.
The base of the Smart 4 is attached to the bracket using rails (simply slide it in).
The bracket can be fixed to a surface with up to three screws.
Through two openings, the necessary cables can be routed to the router.
The model was created with an H2D printer and requires support under the rails.
It was designed using Fusion 360.
Use it on your own risk or modify the wall mount.
(The new version has two openings (on both sides)!