1 / 3
Carbon Pellet holder 120mm- Subsitute for Prusa advanced filter, for use with VOXEL PLA Vento filter — zdjęcie 1
1 / 3

Carbon Pellet holder 120mm- Subsitute for Prusa advanced filter, for use with VOXEL PLA Vento filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows for use of Voxel Pla Vento filter (120x120x20mm) instead of Prusa's 120x120x40mm filter

Ocena
0 / 5
Polubienia
10
Pobrania
16
Wydruki
0
Wyświetlenia
309
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prusa's Hepa Carbon filter for advanced filtration is ~120x120x40mm, and is made by Alevo 3D. It is very high quality, but the thing I couldn't justify was its cost. (Also the activated carbon in mine got saturated after only 300 hours) It is 29USD, which isn't crazy, but when you add on shipping and tarriff to the US, it gets too expensive. Voxel Pla makes a ~120x120x20mm hepa carbon filter, which is thinner (20mm), but costs only 12.99 each with cheaper shipping. The remaining 20mm width can be filled with more activated carbon, which I also got from them, and allows for the activated carbon to be replaced separately. Besides for me most of the issue is the smell.

Price comparison:
  • OG prusa Adv. Filter
    • 29 for 1 filter (~120x120x40mm)
    • 15-25 for shipping
    • Tarrif maybe?
  • Mixed soloution (From VoxelPLA in this case)
    • 12.99 for 1 filter (~120x120x20mm)
    • 14.99 for 1lb activated carbon, more than enough to fill ~120x120x20mm volume 4 times
    • 5-10 for shipping (I wouldn't reccomend the cheapest option since it took them 15 days to ship it)
    • Some foam tape

As you can see the price is pretty comprable, and I find that when printing alot of ABS and ASA the activated carbon goes first, so its nice to be able to replace it independently.

Slicing:
  • Change the part in the 3mf called modifier to a modifier
  • Change layers and perimeters: No top, no bottom, 5 perimeters
  • Change infill: 50-70% triangle

 

Tagi