Stepped Diamond Painting Tray 4x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My GF and I worked on this design for a while before she was satisfied that this was the final iteration. It's a…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 1600
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
My GF and I worked on this design for a while before she was satisfied that this was the final iteration.
It's a relatively compact diamond painting tray organizer. Print four trays and one top, one buttress. If you find the slots are too tight, you should print it scaled up 5% in Z axis to accommodate your trays. I made it this way intentionally to make moving it around less of a risk.
Edit: By request, I have added "WideTrays" and "WideTop" files for the 2.25"x4,00" (58x102mm) trays. I have not tested these as I don't have appropriate trays to test them with. These are made to index to eachother horizontally as well, so you can make some ridiculous-huge assemblies of them if you want.
Print Settings
Printer:
SV01
Rafts:
No
Resolution:
.2
Infill:
10% gyroid (or whatever)
Filament: irrelevant PLA, PETG irrelevant
Notes:
The blue loctite glue bonds PLA very well.
Glue the parts together.
Seriously, they stack. Just run some glue in the lines and stack 'em. Put something heavy on top until the glue sets.
Category: Art Tools