Photography Clamp Replacement Tip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed tips that upgrade a widely used silver reflector clamp /holder found in most photography studios
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
These 3D-printed tips upgrade the widely used silver reflector clamps found in most photography studios. The stock jaws are great for gripping almost anything else, but silver reflectors or other flat objects. These 3d printed wedgewedge tips fix that by giving your clamp a flat, secure surface, perfect for holding foam boards, bounce cards, gels, or diffusion panels that are thin and flat.
They simply slide over the existing metal jaws, replacing the rubber of the clamp, no glue or screws needed. Designed to fit snugly while protecting your gear from scratches.
Details:
- Compatible with the standard silver reflector clamp used in photo studios
- Recommended print material: TPU for extra grip - but I printed in PLA with fuzzy skin and it works well
- No supports required, quick and easy print
- Print of the flat side with the hole in it
- Optional: add thin rubber or felt pads for extra grip
- Get the clamp here: https://s.click.aliexpress.com/e/_c31ZvB3h