kniting marshall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cute major 3 headphones
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this hat for the approaching winter. Of course, I plan to make ear pads too, but that's a little more complicated. You don't have to use knitting; you can use any soft, thin material, such as denim or leather.
You will need :
- a Marshall Major ( I don't know if it works with the Bluetooth version )
- wool
- M2 x 5 mm screws
- 3D inserts for M2 screws
- two M3 screws
- M3 inserts
Here is an example of how to install the circuit. First, you must unsolder one side of the Marshall, remove the cables up to the other side, pass them through the new casing on both sides, and then resolder.
Don't forget to fit all the inserts; there are 8 m2 inserts and 1 m3 insert for each part.
As can be seen, many different types of materials and thicknesses can be placed between the two parts for customization