Couch Arm Mouse Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save your couch fabric and give yourself a better mousing surface with this customization mouse pad
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 1426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a better surface to use my mouse on when I'm sitting on my recliner, so I designed this mouse pad with flexible wings that help keep it on the couch arm. It's a multimaterial print, but doesn't require a tool changer. If you have low standard, I've found mousing directly on a PETG surface fine, but one could just glue a mousepad to the center section if they have different preferences.
(Ignore the horrid-looking top surface on the pictured model, my SV08 had a partial jam near the end)
Print Settings
- Set a filament change on layer 5 to handle the transition from the tpu backing to hard surface
- You may want to play with bottom layers to get a good bonding surface between the two materials
- I used 95A TPU for the bottom and PETG for the top, weld seems good.
- Print the TPU side nice and slow
- Consider slowing down on the first layer after the transition.
Model Information
If you want to adjust the model for a smaller arm, or want to make any other changes, here's the cad:
https://cad.onshape.com/documents/509ab99befb182fc43f71e18/w/17376232a9c21bce19007f66/e/d39e9de3b3906ce834de80b3