1 / 2
Sherco Trial Clutch Holding Toll 1999-2016 — zdjęcie 1
1 / 2

Sherco Trial Clutch Holding Toll 1999-2016

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holding tool for Sherco trials bike clutch. Avoid clutch basket damage.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Tool for holding clutch on Sherco trials motorcycles form 1999 to 2016.  Don't hold your basket with screwdriver or similar tool, you can easily break basket. I use this printed tool to torque clutch on my Sherco 1.25. Fits tight with no play. I used this with no problem to replace my basket, and even to hold crank when torquing primary sprocket.

Torque for clutch nut -  61 Nm (45 ft/lb)

Printed with ASA - 75% infil. I think it may be printed with PLA or PETG. I recommend print this with -0.2 mm horizontal expantion, or simply test print couple of layers to test fit first.

Tagi