1 / 6
120mm low-profile deshroud mod for MSI Ventus 3x 3080 — zdjęcie 1
1 / 6

120mm low-profile deshroud mod for MSI Ventus 3x 3080

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

120mm Fan mounts for MSI Ventus 3080 GPU to replace stock fans

Ocena
0 / 5
Polubienia
3
Pobrania
65
Wydruki
0
Wyświetlenia
468
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

I designed a low-profile (4mm thick) 120mm fan adapter to deshroud-mod the MSI Ventus 3x RTX 3080. Presumably the 3080 ti and 3090 versions have the same cooler. I made it extra slim to fit the 3 slot configuration of my  FormD T1 V1.1.

Yes, the stock mounting holes on the card are placed super wonky.

I printed it in PETG with 100% infill, no support. I don't recommend PLA as it is likely to melt or deform. The fans are mounted with radiator screw directly into the plastic. It is not ideal but makes printing mach easier and is necessary for mounting, as the fans block access to the cooler screws and need to be mounted last. 

The original screws are a bit short, but will fit. Additionally I found some M.2 screws that have the correct thread and are a bit longer.

  

Tagi