Brown Tooth brush Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of having gunk in the bottom of your electric toothbrush? look no more!! :D
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So, one more Household Print;
I got tired of having a “glued toothbrush” from the water that inevitably runs down form the toothbrush even after drying, one trip to Fusion and here we are!
This has been in use for 1 year now, in June last year i printed the support in PETG for my girlfriend since she broke the first in PLA, holding on since August 2021, mine is still running just good with PLA, so, i guess depending in the person, you might need to print in PETG.
The base has holded just fine for 1 year so far.
Print recomendation:
Base:
- 0,4mm Nozzle;
- 0,2mm Layer Hight;
- PLA;
- No supports;
- Defaults from Prusa;
Support:
- 0,4mm Nozzle;
- 0,2mm Layer Hight;
- PLA or PETG (girlfriend proof) ;
- use supports as recommended in the 3mf file.
- minimum 6 perimeters;