Hexagonal 1.25" eyepiece holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for six eyepieces, ment to fit onto circular and triangular tripod trays
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
Designed to print without support at 0.25 mm layers.
Three different sizes: 45, 50 and 55 mm centre-to-centre between adjacent eyepiece cups. The eyepieces are held in place by M3-screws, so six screws (8-12 mm) and matching heat-set nut inserts are needed. In the middle of the central bowl there's a 5 mm hole and a slot for an M5 nut for attachment.
| CC | OD | CD | ID*¹ | ST*² | S |
|---|---|---|---|---|---|
| 45 | 128 | 52 | 116 | 201 | 66.939 |
| 50 | 138 | 62 | 125 | 216 | 71.939 |
| 55 | 148 | 72 | 134 | 231 | 76.939 |
*: ID and ST are rounded to up to nearest mm
¹: Inner diameter of the hexagon = 2S×cos(30°)
²: Sides of the theoretical outer triangle = 3S
Common for all sizes: depth = 30, total height = 31.75, eyepice hole diameter: 32.32, wall thickness: 2.84
The extrusion for the holding screw extends an extra 4mm (parallel to the cup on to the right), beginning 16.5 mm from the bottom.