Taco Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for preparing and serving your tacos!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Introduction
I designed this one day simply because i wanted one after struggling with my tacos. Right now I have two designs. They are essentially the same except the original is solid and version 2 is a material saving model. They stack although not perfectly. I plan to make one more that stacks perfectly, saves material, and is faster to print. What do you think so far? What is your favorite taco recipe?
Printing
I did not use any special settings for this. I used PETG for the prints in the attached photos, i suggest using any other food-safe filament. I would also suggest to print on its side so the layers are continuous across the part. Below is a brief summary of the basic printing settings.
Version 1: (solid)
| Material: | PETG |
| Nozzle Temperature: | 240C |
| Bed Temperature: | 85C |
| Layer Height: | .2mm |
| Infill: | 10% |
| Supports: | None |
| Skirt and Brim | None |
Version 2: (Grid pattern)
| Material: | PETG |
| Nozzle Temperature: | 240C |
| Bed Temperature: | 85C |
| Layer Height: | .25mm |
| Infill: | 10% |
| Supports: | None |
| Skirt and Brim | None |