Dragon - Golden Guardian statue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first publication. Originally made for my daughter, I decided to share based on Reddit feedback.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 1152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first model that was originally made for my daughter, and I decided to share based on Reddit feedback. I hope you like it.
This was modeled with AI & Meshy and is my vision of one dragon from the books she is reading.
The printer used was an Elegoo Centauri Carbon using Geetech gold silk PLA. I printed outer walls @ 60mm/sec andthe nozzle temp was set to 230°C with a .2mm layer height, if not using a metalic silk you wouls likely want to reduce the layer height to reduce lines.
Edit- I neglected to add, you will need supports enabled. The setting that worked for me was Tree(auto), Tree(slim).
Link to filament- https://www.amazon.com/dp/B07RBSGZBM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Please let me know if you like it and would want to see more.