Bash guard for 32t chain ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Drazen's bash guard with the outer edge moved out roughly 3mm to fit a 32t chain ring. Forgive the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of Drazen's bash guard with the outer edge moved out roughly 3mm to fit a 32t chain ring.
Forgive the screw driver fasteners, they're all I had sitting around at the moment.
Choose your own print settings. I used 0.6mm walls x 4 with a 45% infill, .25mm layer heights, 4 layers top and bottom. Material shown is carbon fiber infused PETG but I'll probably end up using NylonX if I ever get around to calibratiing the printer for it.
EDIT: On further inspection I think I'll make up another one of these that's a couple mm bigger, right now it's basically even with the chain.
Category: Hobby