Malazan Bonehunters Sigil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Malazan Bonehunters sigil art piece for your bookshelf
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted some Malazan-themed pieces to fill out my bookshelf, but searching online, I wasn't able to find a whole lot of options. So, I made my own.
This is the Bonehunters sigil, designed to be printed in 3 colors: Black, Beige, Gold, and Silver. In the example pictured, I used PLA for the black and beige and PLA Silk for the gold and silver.
There are two pieces: the frame, and the inner sigil. They are designed with a zero tolerance fit, since my MK4 is able to print to that accuracy and ensure a tight fit, but YMMV.
Check out my Bridgeburners design as well!
Recommended layer switches:
Inner Sigil: Layers 1-8 [BLACK], Layers 9-20 [GOLD], Layers 21-23 [BLACK], Layers 24-33 [SILVER], Layers 34-63 [BEIGE]
Frame: Layers 1-75 [BLACK], Layers 76-78 [SILVER]