Pioneer SBX N700 Soundbar Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised 3D-printed foot connector, shorter than the original SBX-N700SB part.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a shortened replacement foot connector for the Pioneer SBX-N700SB soundbar.
The original soundbar feet were noticeably taller, so this version was redesigned to reduce height for a cleaner look and lower profile.
Additional recesses were added underneath to allow the installation of silicone anti-slip pads, improving grip and surface protection.
The mounting geometry is identical to the original part, fully compatible with the factory screw and connection points.
If you need a longer or shorter version, you can easily adjust the Z-axis scale in your slicer to modify height without affecting fitment.
⚠Important:
Do not scale the model in X or Y directions, as this will alter the mounting hole position and may cause misalignment with the original screw.
⚠Only modify the Z-axis for height customization.