WAGO 221-2411 - multi-level DIN rail mount | Mehrstockklemme DIN-Schiene
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,63 € – 0,77 € netto (bez VAT)
Dla pliku: Wago221-2411_Mehrstockklemme_Grundklemme_0.4n_0.1mm_PETG_XL_51m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,70 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 51 min
- Materiał u źródła
- ABS
- Materiał wyceny
- ABS
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Mehrstockklemme für WAGO 221-2411 zur Montage auf Hutschiene. Expandable multi-level terminal for WAGO 221-2411.
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 1091
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
(English below)
Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene:
Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul, von welchem beliebig viele auf das Grundmodul aufgerastet werden können, und einem Abschlussdeckel, welcher als Beschriftungsträger für Etiketten WAGO 210-806/000-002 genutzt werden kann. In jedem Grund- und Aufsteckmodul kann je eine Klemme WAGO 221-2411 von oben eingeschoben werden. Dadurch entsteht eine platzsparende und beliebig anpassbare Mehrstockklemme - natürlich ist auch eine einstöckige Durchgangsklemme realisierbar - für die Montage in Schaltschränken, Sicherungskästen/Unterverteilungen oder sonstigen elektrischen Schaltanlagen mit DIN-Schienenmontage.
Ich habe das Grundmodul aus PETG gedruckt, wobei andere feste Filamente, wie ABS, Nylon oder Onyx auch geeignet sind. Die Aufsteckmodule wurden aus TPU gedruckt, um die seitlichen Rastnasen belastbarer zu machen, wobei einige feste Filamente, wie Nylon, auch geeignet sein sollten.
Bei Verwendung von flexiblen Filamenten empfehle ich, ein Aufsteckmodul mehr als benötigt ODER den Abschlussdeckel zu drucken, da das letzte bestückte Aufsteckmodul sonst leicht auseinandergezogen wird und die Klemme nicht richtig darin hält.
Expandable multi-level terminal block for WAGO 221-2411 terminal blocks for mounting on a 35 mm DIN rail:
This multi-level terminal block consists of a base module that can be snapped onto a DIN rail, a plug-in module, of which any number can be snapped onto the base module, and a cover that can be used as a label holder for WAGO 210-806/000-002 labels. One WAGO 221-2411 terminal can be inserted from above into each base and plug-in module. This creates a space-saving and freely adaptable multi-level terminal block – of course, a normal feed-through terminal block can also be implemented – for installation in control cabinets, fuse boxes/sub-distribution boards or other electrical switchgear with DIN rail mounting.
I printed the base module from PETG, although other rigid filaments such as ABS, nylon, or onyx are also suitable. The snap-on modules were printed from TPU to make the side tabs more resilient, although some rigid filaments such as nylon should also be suitable.
When using flexible filaments, I recommend printing one more snap-on module than needed OR printing the end cap, as otherwise the last snap-on module assembled will be easily pulled apart and the clamp will not hold properly in it.
Auch bestellbar unter / Also available to order at: WAGO 221-2411 - Mehrstockklemme DIN-Schiene | Terminal DIN rail | WAGO Creators
(Hinweis: Titelbild ist KI-optimiert, Modell, Texte und Bilder sind selbst erstellt)