Lithophane frame for curved image.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic-easy to print frame for whatever picture you want.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 749
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Do you need for somebody an original and cool gift? If so, no problem, lithophane is a cool way to make one.
Picture
- Convert your picture to stl.
The best way is to use this web page: https://3dp.rocks/lithophane/
Just set the picture to outer curved, in model settings set the thickness to 2.4 mm
Then set the correct dimensions in prusaslicer.
But if your picture doesn't fit. You can always make some changes in fusion or use the same picture as me.
Lamp dimensions
I used an outdoor LED lamp, but it doesn't matter what you choose, only it should be bright enough.
Dimensions: 115×85,5mm-thickness 5,7mm
Dimensions of the space for the lamp
Assembly
The assembling process is quite easy:D
- Put your picture into the frame
- Put your LED into the frame
- Close it with 2 M4 16mm long screws
Print description
For picture
Always print vertically!!
Filament: PLA is the best or PLA+
Layer height: 0,15mm
Infill: 100%
Brim: yes
Supports: no
And avoid crossing outline
For frame
Filament: PLA is the best or PLA+
Layer height: 0,15mm
Infill: 20%
Brim: no
Supports: no