Screw sorter tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While building my Prusa Core One from the kit, I figured I totally need such a tray. So I made one ;-)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 216
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Use case
This is tray is a lifesaver when you build a 3D printer from a kit, or doing any other assembly that comes with a lot of different small parts needed in different steps of the assembly.
Features
The flat surface on the north side of the small parts allows to put a piece of painters tape on for writing to it. On the south side there a strong fillet that helps a lot to get small parts out with you fingers.
Printing
Printing this tray is very simple. Just print it with default settings in the uploaded orientation. No supports are needed. The tray is sized to fit onto a Pursa Mini or other smaller printers.
Happy printing!