1 / 8
MMU3 Totally On Top of Core One — zdjęcie 1
1 / 8

MMU3 Totally On Top of Core One

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combining several great designs listed here is a way to keep the entire MMU3 within the footprint of the Core One.

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
526
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The attached files are simply Sams excellent top cover resized to move the spools more to the front thus allowing room for the MMU3 unit to sit and position freely on top.

Also there is a small simple sliding cover for the ptfe tube to feed the extruder, yet pretty much keep the top opening covered. The small disk on the undersie is to keep the cover oriented while still free to move.

The comb tower is sized for some 12mm tube on hand. The threads on the collar for the thumpscrew may be “chased” with M6 tap. Also look for a slight spiral groove on the collar to locate a glue the comb at the proper angle.