1 / 2
Jessem Router Lift Hole Cover w/ magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to cover the hole completely in a jessem router lift.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this to cover the hole in my router lift when not in use. When you slice it you will see a void in the middle. Simply pause the printer before it is covered and add 2 magnets (15mmx2.2mm each). You could probably get away with 1 magnet but i wanted to be sure. Resume printing and it will cover the magnets.