Pokemon Pokeball Wall Art Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic Pokeball Wall Art piece with a mount for a screw/nail/tack.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Pokemon Pokeball is the perfect Wall Art for anyone looking to show off their love for Pokemon.
The Pokeball is 8 inches round, and 0.25 inches thick, and features a mounting hole on the back side of the model. This hole allows you to mount the Wall Art on most screws, nails, or tacks in the wall. The flat back of the Wall Art means that you can also use less-permanent mounting solutions like double sided tape to mount.
Recommended Printer settings:
Layer Height: 0.2mm
Infill: Min - 5%, Gyroid recommended.
NO SUPPORTS NEEDED - It is not recommended to print this model with supports, as it is very difficult to remove the supports from the mounting hole without damaging the print.
Remember to upload your makes and help the next guy get a better print!