1 / 3
Milwaukee Brewers Hype Chain Necklace (No AMS!) — zdjęcie 1
1 / 3

Milwaukee Brewers Hype Chain Necklace (No AMS!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Show off your hype for the Brew Crew with this easy print that doesn't require AMS or supports! BREWLIEVE, YALL💙💛

Ocena
5 / 5
Polubienia
21
Pobrania
320
Wydruki
1
Wyświetlenia
938
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This hype chain necklace is a remix/variation of Jackson's 3D World's model, Milwaukee Brewers Hype Chain optimized for single-color printing for those without AMS printers or who are just looking to cut down on waste! Permission for posting remix was graciously given by @Jacksons3DWorld in the comments of his original model. This design uses his chains; I redesigned the pendant from the 2D Brewers logo so that the yellow and blue layers would be separate files to allow for single extruder printing. Just need a bit of super glue to put the layers together and then you too can show off your hype for the Brew Crew! 💛💙

Print Instructions:

  • No supports needed, standard printer settings used on my Ender 3 Pro (20% infill, single layer walls, etc.)

  • Recommend printing 30x of the hype chain links, half in blue and half in yellow but feel free to adjust as you see fit for size

  • PLA color recommendations: Print in pictures was made with Inland Dark Blue PLA+ and Inland Yellow PLA Pro (normal PLA will work fine; used what I already had!)

  • Note: If you need more detailed instructions, Jackson's 3D World has great information on his original model, including a YouTube tutorial video!

Post-Print Instructions:

  • Yellow and Blue parts of the logo are best combined with superglue 

  • Recommend white acrylic paint for center baseball part of logo; do several layers letting it dry between applications

 

Note: I decided for simplicity to just paint the yellow baseball in the center of the mitt using some white acrylic paint I already had, but if anyone wants to print that part out too let me know and if I'm not too busy at the time, I will try to accommodate and make that part too!

Tagi